Landowner guide

Could a battery storage yard affect an industrial site’s no-exposure certification?

An industrial owner considering a battery storage lease should check an existing no-exposure certification before allowing outdoor staging or shared yard use. The answer depends on the actual facility, activities, drainage and permitting authority.

The short answer

Gather the current certification and facility map, mark the proposed lease, staging and drainage areas, and ask the existing operator and permitting authority how the proposed activities relate to the certified facility. If a change would expose industrial materials or activities and end eligibility, the operator should obtain required permit authorization before the change. Construction stormwater is a separate question.

Start with the current certification and yard plan

Obtain the current no-exposure certification, facility map, supporting records and any correspondence with the permitting authority. Identify the certified operator, the existing industrial activity and the areas used for storage, loading, equipment and drainage. Ask whether the certification remains current; EPA says recertification is required at least every five years.

On the same plan, show the proposed battery lease area, construction staging, laydown, deliveries and shared routes. Identify where runoff travels and whether the industrial operator or a separate project operator would control each activity. A property boundary or lease line alone does not settle the regulatory facility boundary.

Illustration of a land parcel and surrounding landscape

Test the proposed activities against the condition

EPA explains that the conditional exclusion is facility-wide, not available for individual outfalls. The federal rule generally requires industrial materials and activities to be protected from rain, snow, snowmelt and runoff, subject to specified exceptions. Outdoor material handling, storage and exposed residues deserve particular review.

The rule includes limited exceptions, such as certain tightly sealed, undeteriorated, nonleaking containers secured without operational taps or valves, and adequately maintained material-handling vehicles. Do not assume all outdoor equipment or staging is automatically disqualifying or automatically exempt. Ask the operator and authority to evaluate the actual materials, activities and arrangement.

If an anticipated change would end the exclusion, the federal rule directs the conditionally exempt discharger to apply for and obtain permit authorization before the change. Confirm the applicable process and timing with the permitting authority before staging begins.

Separate construction and operating questions

Construction stormwater discharges covered by the federal construction provisions are not eligible for the industrial no-exposure exclusion. Ask the developer to identify the planned disturbance, construction operator and applicable construction permit requirements separately, including state and local requirements.

A battery project is not automatically covered by the host’s certification, and the mere presence of batteries does not establish that a particular operating project requires an industrial stormwater permit. Ask the permitting authority how it regards the proposed operators, facility boundaries and activities, including whether a separate facility is involved.

Want to ask about your land?

Send the location and what you know. You don’t need a project plan.

Tell us about your land

Assign the next steps before leasing the yard

Ask who will contact the state or EPA permitting authority, obtain any needed authorization, maintain controls, inspect shared areas and respond to spills. Have the agreement address access, changes in use, costs, notices and responsibility for restoring the yard. Counsel and a stormwater professional can review the actual plan and documents.

An owner or authorized representative can ask Sunland to review a property or existing project agreement anywhere in the United States. Share the location, approximate acreage, current use and the yard question; provide the certification and detailed site records privately if requested.

Questions landowners ask

Is a no-exposure certification limited to one drain?

No. EPA says the exclusion is facility-wide, not for individual outfalls.

Does outdoor staging always void the exclusion?

Not necessarily. Evaluate the specific materials and activities, applicable exceptions and facility boundary with the operator and authority.

Does the host’s certification cover construction?

Construction stormwater is a separate question. The industrial no-exposure exclusion does not cover construction discharges identified in the federal rule.

Sources & further reading

Sources checked 2026-11-15. Local rules and program details can change. Check the requirements for the actual project.

Want to ask about your land?

Send the location and what you know about the property. You don’t need a project plan, and you are not committing to a lease or sale.

Tell us about your land
Ask about your landTell us about your land