Identify the display area and the dealer’s rights
Obtain the dealer’s lease and amendments, site plan, license information, any relevant DMV inspection or application materials and current photographs. Ask the tenant to identify the principal location, any branch or additional display area, the vehicles sold and the boundaries actually used for display. Compare these with the legal parcel, leased premises and any reserved access or parking rights. A paved area used for ordinary customer or employee parking is not automatically the licensed display area; neither its appearance nor a label on an old plan settles the question.
DMV’s dealer license guidance says the principal place of business display area must physically accommodate vehicles of the type the dealership is licensed to sell and be clearly for the dealer’s exclusive use for display purposes only. OLIN 2023–08 describes the display area requirement and the need for an established place of business and signage. Wholesale-only dealers differ; this scenario concerns an occupied retail dealer. Confirm the applicable requirements and boundaries with DMV Occupational Licensing.

Overlay the permanent footprint and working access
Place battery containers, transformers, foundations, fencing, gates, utility routes, drainage and any required clearances on a dimensioned plan. Compare that plan with the existing display area, office and signs, customer and delivery entrances, inventory movement and emergency access. A battery enclosure or shared project use inside the display area raises the exclusivity issue; a layout outside it can still interfere with the tenant’s rights or operations. Do not assume a small leftover paved area is sufficient for the dealer’s licensed vehicle types.
Ask the tenant what space and routes it needs during normal operations, deliveries and seasonal peaks, and which changes require consent under its lease. Ask DMV whether the proposed remaining display area and signs satisfy its requirements, what change notification, inspection or photographs are required, and whether a revised layout can be used while the dealer remains open. Record the actual response and any conditions; a proposed plan or favorable conversation is not itself an approval.
Test construction and an alternate layout
Show construction laydown, crane setup, trenching, deliveries, temporary fencing and equipment movements separately from the finished project. Identify dates and who controls each area. Temporary staging in the dealer’s exclusive display area can conflict with its required display use even if the completed battery sits elsewhere. Maintain workable access to the office, displays and site throughout each phase, and ask DMV and the tenant to evaluate the temporary arrangement before relying on it.
If the current display area would be reduced or displaced, draw a dimensioned alternate area and show its vehicle capacity, exclusive display use, access and signs. DMV states that additional display areas within 1,000 feet of the principal place of business or a licensed branch can be used without separate licensing, subject to signing requirements; confirm whether this rule fits the proposed location and whether other steps apply. The rule does not automatically make any nearby parking area an acceptable substitute.
Want to ask about your land?
Send the location and what you know. You don’t need a project plan.
Tell us about your landDocument the handoff and remaining approvals
DMV’s photography guidance for new and used vehicle dealer applications calls for images of the office, sign, display area and location; the display photos must clearly show enough room for the type of vehicles for sale and exclusive use by the licensee. Ask DMV what updated evidence, if any, it needs for this particular change. Keep dated plans and photographs, written tenant consent or lease amendments, correspondence with DMV, any required filings and inspection results with the transaction records.
Define the project boundaries, access easements, temporary construction rights, responsibilities, timing and remedies if tenant consent or required agency action is delayed. Coordinate utility, fire, zoning and building review with the relevant authorities; DMV dealer compliance does not establish battery project approval. Condition possession and ground disturbance on the agreed tenant arrangements and applicable approvals. Sunland reviews land and existing project opportunities nationwide, including California battery storage sales, leases and assignments. An owner or authorized representative can share the location, acreage, existing tenant and proposed footprint privately.
Questions landowners ask
Can a battery enclosure share the dealer’s display area?
DMV says the display area must be exclusively used for display purposes. Show the proposed enclosure and remaining area to DMV and the tenant; do not assume shared use satisfies the requirement.
Can construction materials be staged there temporarily?
Temporary staging in the display area can conflict with its exclusive display use. Map each construction phase and confirm an acceptable arrangement with DMV and the tenant before staging.
Is nearby parking automatically an acceptable replacement?
No. An alternate display layout needs review for sufficient size, exclusive display use, signage and applicable location requirements. Confirm the specific proposal with DMV and secure the tenant’s agreement.
Sources & further reading
California DMV vehicle dealer license, occupational licensing photography requirements and OLIN 2023–08 checked November 17, 2026 Pacific. Confirm the site-specific layout and any required filings with DMV and applicable local authorities. Local rules and program details can change. Check the requirements for the actual project.