Identify the agreement and choose a path
Request a title search and the recorded agreement, amendments and any prior releases from the county register of deeds. Map the legal description against parcel boundaries and the proposed project. Ask DATCP to confirm the agreement in force, the actual expiration date and which acres are covered. Older agreements may have different terms; do not infer the end date from a general 10-year description.
If the project needs an incompatible use while the agreement is effective, an owner may request release of all or part of the covered land. DATCP says land intended for development outside permitted uses must be released before construction that would materially violate the agreement. A project label or developer promise does not establish that a particular solar layout is allowed or that a release will be granted. Give DATCP the actual plans and ask which activities and footprint require release.
If timing permits, compare waiting until the agreement actually expires. DATCP’s sample agreement provides for automatic expiration without further action or recording and no conversion fee at normal expiration; confirm the actual agreement’s terms and date with DATCP. Until then, comply with the effective agreement. If the owner plans to continue participation, a new agreement can cover selected eligible acreage while leaving an identified area out. Excluding land from a new agreement does not release it from the current one early.

Prepare a partial release request
All owners of land covered by the agreement must consent in writing. DATCP must find that the release will not impair or limit agricultural use of other protected farmland, and the owners must pay the statutory conversion fee. The release application is signed and notarized and accompanied by a map, a legal description of the land to be removed, and the fee. DATCP lists a deed, certified survey map or plat of survey among possible sources of the description. The current release form also calls for signatures and subordination or consent from holders of interests, such as mortgage, lease, easement or mineral rights holders; ask DATCP and title counsel to identify them and obtain required consents before setting the schedule. Ask DATCP to confirm the packet and acreage before submitting it.
For each acre or portion of an acre released, the fee is three times the per-acre value for the release year of the highest value category of tillable cropland in the city, village or town, as specified by the Department of Revenue under section 73.03(2a). Use the applicable year and municipality and ask DATCP to confirm the calculation; do not budget using a generic per-acre estimate. The statute requires DATCP to provide its decision to the owners’ designated person and present it to the county register of deeds for recording. Confirm the release effective date with DATCP for the actual agreement and obtain the recorded decision before incompatible construction.
Draw the requested area around the full proposed use, not just panels: consider fencing, roads, equipment, buried lines, drainage, staging and access. Compare temporary and permanent work with the agreement and seek DATCP guidance on the necessary boundary. Keep a second map showing the acreage that remains covered so the farm can continue to manage its obligations.
Plan reenrollment and the retained farm
For eligible land in an Agricultural Enterprise Area, DATCP says an owner with an expiring agreement can apply for a new agreement. To avoid a lapse in tax credit eligibility, apply in the year the current agreement expires. New agreements run for 10 years from signing by all landowners and DATCP. Confirm eligibility and timing rather than assuming renewal is automatic.
For a proposed exclusion of part of a parcel, include a legal description and a map showing the excluded portion in the application. Supply recorded ownership documents, recent property tax statements and copies of relevant easements, leases, access rights and other recorded agreements. DATCP reviews those documents for compatibility; county staff may help prepare a map. Discuss the likely solar area before signing the new agreement, including room for supporting infrastructure.
Excluding acreage from the agreement does not eliminate every farm obligation. DATCP says excluded farmland must still meet applicable soil and water conservation standards for the farm to remain compliant. Work with the county land conservation department on compliance across the farm, including common ownership lands, and ask a tax adviser how changes in covered acreage and timing affect eligibility for credits.
Want to ask about your land?
Send the location and what you know. You don’t need a project plan.
Tell us about your landCoordinate the transaction and local rules
A recorded agreement runs with the land: DATCP says a purchaser takes on its terms until expiration or release. For a partial sale, compare the deed and purchase agreement with the covered-land map and proposed release, identify which party handles the application and fee, and address delay, denial and closing conditions with Wisconsin counsel. A sale alone does not remove the restriction.
For a lease, compare the lease premises, construction rights, access and timing with the agreement and proposed release. A lease does not itself release the land. If a purchase contract or lease can be assigned, review the assignment and related consents, responsibility for the application and fee, and who must deliver the recorded decision. A later specialist should receive the same agreement, maps and obligations; assignment is not DATCP approval.
A farmland preservation agreement is distinct from certified farmland preservation zoning. A property may be subject to either or both. Ask the county zoning office about the applicable ordinance, land division and project approvals separately; expiration or release of the agreement does not change zoning. Confirm other easements and local requirements before fixing the layout or construction schedule.
Start a Sunland conversation
Sunland considers solar land opportunities nationwide. Share the Wisconsin location, approximate acreage, ownership, agreement end date if known, desired solar footprint and whether the rest of the farm will remain enrolled. Provide the agreement, title materials and maps privately when appropriate. Sunland may contract for a parcel and assign the opportunity to a specialist. Ask DATCP and county officials about the actual agreement, release footprint and separate zoning requirements before relying on the project schedule.
Questions landowners ask
Can I release only the solar area?
DATCP may release part of the land if statutory conditions are met. Submit the required map and legal description, and ask DATCP to review the full proposed footprint.
Can construction start after I apply?
An application is not a release. DATCP says land must be released before construction that would materially violate the agreement. Obtain approval, confirm its effective date with DATCP and obtain the recorded decision before that construction.
Is a conversion fee due at natural expiration?
DATCP’s sample agreement provides for automatic normal expiration without further action or recording and no conversion fee. Confirm the actual agreement and end date with DATCP and remain compliant until then.
Can I exclude land from a new agreement?
Eligible owners can propose enrolling only part of their farm. A partial parcel exclusion needs a legal description and map. It does not shorten an existing agreement.
Does a buyer inherit the agreement?
A recorded agreement runs with the land, and DATCP says the purchaser must comply until expiration or release. Provide the agreement and any recorded release in the transaction.
Does release resolve zoning?
No. Ask the county about certified farmland preservation zoning and other local requirements independently of the DATCP agreement process.
Sources & further reading
Sources checked 2026-11-18. Local rules and program details can change. Check the requirements for the actual project.
- DATCP: Farmland preservation agreement release process
- DATCP: Farmland preservation reenrollment
- DATCP: Apply for a farmland preservation agreement
- DATCP: Acquiring lands enrolled in a farmland preservation agreement
- DATCP: Sample farmland preservation agreement
- DATCP: Application to remove land from a farmland preservation agreement (March 2024)
- DATCP: Farmland preservation zoning for landowners