Maryland landowner guide

Which acres count toward rent in a battery storage lease?

A developer’s battery layout can show one acreage while the lease uses a different acreage to calculate rent. Before signing, agree on which areas count, whether rent has an acreage floor and whose written approval is needed to change the measurement.

Could my land work?

Ask for a dated site plan and a rent schedule that show the lease boundary, any exclusive easements that earn rent and the minimum acreage used for each payment. Agree on who measures those areas, how both parties approve them in writing and which approvals must come through before rent is due.

Agree on the areas that earn rent

Start with the proposed equipment area, access routes, utility corridors and temporary work areas. For each area, identify its boundary, who may use it, and whether the proposed lease counts it toward per-acre rent or pays for it separately. A route can burden your property even when the lease assigns it no acreage-based rent.

In a signed lease for the proposed Sewell project in Frederick County, Maryland, section 5.1.2 calls for both parties to confirm in writing the premises acreage and any separately compensated exclusive easement areas before the construction period starts. The acreage used for rent includes the premises on Exhibit A-1 and only exclusive easement areas expressly listed as rent-bearing on Exhibit A-2. The tenant cannot redefine or adjust that acreage or the premises on its own.

The signed lease describes the initial A-1 drawing as approximate and calls for a final location amendment on or before the Construction Date. It caps the premises within the area shown on the initial exhibit at 9.76 acres. Exhibit A-2 in the county packet leaves the easement area for later attachment. Ask for the final signed exhibits and the written acreage confirmation before relying on a rent calculation.

Illustration of a land parcel and surrounding landscape

Use the floor to check the calculation

The Sewell lease applies the higher of the agreed rent-bearing acreage or 9.76 acres to both construction and operating rent. The base annual rates in this agreement are $5,000 per acre during construction and $20,000 per acre during operations. If the conditions for payment are met and the 9.76-acre floor sets the calculation, those figures produce $48,800 in annual construction rent and $195,200 in annual operating rent at the base rate before adjustments. These figures come from this agreement.

Have the developer show the calculation for the initial plan and for a smaller layout. Ask whether an exclusive easement is included in the acreage total, separately paid or both under the proposed wording. Put the agreement beside the map. Confirm who must sign a change, when it takes effect and how a partial start would affect the next payment.

Sewell lease phaseBase annual rate per acreAnnual rent at the 9.76-acre floor
Construction$5,000$48,800
Operations$20,000$195,200

Check what needs to happen before payment

Read the approval condition alongside the rent formula. Section 5.3 of the Sewell lease conditions all payments except the first installment of the first year of development rent on approval for the project’s development, construction and operation under Frederick County and applicable state and local requirements. The posted May minutes record the county’s Agricultural Preservation Advisory Board accepting staff’s recommendation to deny the request on the preserved property. The records reviewed leave the final acreage, ultimate approval status and any payments unverified.

For your proposal, ask the developer to name each required approval and provide the document showing it was obtained. Ask counsel to identify when each payment begins, what you receive while approvals are pending and whether you can release the land if a deadline passes. Use those dates with the lease exhibits and the rent schedule when deciding what to sign.

Want to ask about your land?

Send the location and what you know. You don’t need a project plan.

Tell us about your land

Discuss the acreage and rights in your proposal

Sunland welcomes battery storage land sale, lease and existing agreement inquiries, including potential assignments, across the United States. Share where the land is, the approximate area under discussion and whether you have received a layout or rent schedule. Keep the lease, maps and payment records available for private review.

Questions landowners ask

Can the acreage used for rent exceed the equipment area?

Yes, if the lease includes additional rent-bearing areas or sets a minimum acreage. Check the lease and exhibits for the calculation that applies to each payment.

Does every easement count toward battery storage rent?

Check which easements the agreement expressly treats as rent-bearing. For anything the developer needs to use, identify the right granted and what the lease pays for it.

Does the acreage floor start payments as soon as I sign?

The floor gives you an acreage figure for calculating rent. Read the lease phase, payment dates and approval conditions to establish when the amount becomes due.

Sources & further reading

The publicly filed signed Sewell lease and its exhibits were checked November 20, 2026. The public records reviewed leave later amendments, final layout, project approval and payments unverified. Local rules and program details can change. Check the requirements for the actual project.

Want to ask about your land?

Send the location and what you know about the property. You don’t need a project plan, and you are not committing to a lease or sale.

Tell us about your land
Have land in Maryland?Tell us about your land